TEL 8-2415

DC/DC Converter TEL 8 Series, 8 Watt • Ultra compact 8 W converter in DIP-16 metal casing • Operating temperature range -40°C to +80°C • • • • Wide 2:1 input range Built-in EN 55032 class A filter UL 62368-1 IEC 62368-1 Protection against short circuit 3-year product warranty The TEL 8 series is a range of isolated 8 Watt converters which come in a very compact DIP-16 metal package. They offer a 2:1 input voltage range and feature a high efficiency of up to 86% which allows an operation temperature of up to +70°C at full load. An input filter makes the converters comply with conducted emission EN 55032 class A. The TEL 8 Series models are an economical solution for space critical and cost sensitive applications in instrumentation, IT and industrial electronics. Models Order Code Input Voltage Range TEL 8-1210 TEL 8-1211 TEL 8-1212 TEL 8-1213 TEL 8-1215 TEL 8-1222 TEL 8-1223 TEL 8-2410 TEL 8-2411 TEL 8-2412 TEL 8-2413 TEL 8-2415 TEL 8-2422 TEL 8-2423 TEL 8-4810 TEL 8-4811 TEL 8-4812 TEL 8-4813 TEL 8-4815 TEL 8-4822 TEL 8-4823 www.tracopower.com 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) 36 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 1'600 mA 1'600 mA 665 mA 535 mA 335 mA 335 mA 265 mA 1'600 mA 1'600 mA 665 mA 535 mA 335 mA 335 mA 265 mA 1'600 mA 1'600 mA 665 mA 535 mA 335 mA 335 mA 265 mA November 9, 2023 Vnom Efficiency Imax –12 VDC –15 VDC 335 mA 265 mA –12 VDC –15 VDC 335 mA 265 mA –12 VDC –15 VDC 335 mA 265 mA typ. 78 % 81 % 84 % 84 % 85 % 85 % 84 % 78 % 82 % 85 % 85 % 86 % 85 % 86 % 78 % 81 % 85 % 85 % 86 % 86 % 86 % Page 1 / 4 TEL 8 Series, 8 Watt Input Specifications Input Current - At no load 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 10 mA typ. 10 mA typ. 8 mA typ. 760 mA typ. 380 mA typ. 190 mA typ. 25 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 8 VDC typ. 16 VDC typ. 34 VDC typ. (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - 20 MHz Bandwidth - single output - dual output Minimum Load Temperature Coefficient Short Circuit Protection Output Current Limitation Transient Response single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - Response Deviation - Response Time ±2% max. 0.8% max. 0.8% max. 1% max. 2% max. (Output 1) 2% max. (Output 2) 55 mVp-p max. 680 µF max. 680 µF max. 330 µF max. 330 µF max. 150 µF max. 150 / 150 µF max. 150 / 150 µF max. Not required ±0.02 %/K max. Continuous, Automatic recovery 150% typ. of Iout max. 5% max. (25% Load Step) 500 µs max. (25% Load Step) Safety Specifications Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/tel8 PD 2 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (internal filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tel8 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 9, 2023 Page 2 / 4 TEL 8 Series, 8 Watt EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A KY 220 µF EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 95% max. (non condensing) –40°C to +80°C +105°C max. –50°C to +125°C 5 %/K above 70°C See application note: www.tracopower.com/overview/tel8 Natural convection (20 LFM) 6'000 m max. 370 kHz typ. (PWM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 500 pF typ. 1'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Alu alloy, black anodized coating Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) DIP16 Lead-Free Wave Soldering 260°C / 10 s max. 6.1 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) acb7a2a8-642b-4cb3-846a-35a2f5870898 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tel8 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 9, 2023 Page 3 / 4 TEL 8 Series, 8 Watt Outline Dimensions 23.8 (0.94) 7 8 BOTTOM VIEW 16 10 13.7 (0.54) 10.16 (0.400) 1 Pinout 9 Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 NC NC 8 NC Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin (Vcc) +Vin (Vcc) 15.24 (0.600) 2.54 1.77 3.0 (0.070) NC: Not connected (0.100) 3.8 Ø0.5 (Ø0.02) (0.15) 8.0 (0.31) (0.12) Dimensions in mm (inch) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Pin diameter tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 9, 2023 Page 4 / 4